 |
15 SERIES Offered in single, two-speed, double output shafts, wheel bearing style, and retractable shafts along with splined, tapered, or straight keyed shafts. Through-hole and thrust bearing options also available. SAE C mount. |
 |
125 SERIES Offered in the A design, (3000 psi) or the H design, (4500 psi). Splined, tapered, straight keyed, female, and double output shafts are standard, along with through holes to 3". Optional thrust and radial load bearings with double stacks, and brake mounts available. |
 |
37 SERIES Offered in the A design (3000 psi), or the D design (4500 psi). Splined, tapered, straight keyed, and double output shafts are standard, along with through holes to 1-1/2". Optional thrust and radial load bearings with substantial capacity, tach pickups, double stacks, and brake mounts available. SAE D mount. |
 |
125 SERIES 4-PORT Combines any two displacements from the 125 series in a 4-port or tandem configuration. Allows for 2- or 3-speed operation using external valving. Available in both A and H designs. |
 |
57 SERIES Offered in the A design (3000 psi), or the D design (4500 psi). The same features offered in the 37 Series are available in a motor that's one inch longer. Modified SAE D mount. |
 |
DRILL MOTORS Available in all series as 2- or 4-ported models as listed above. Numerous bearing/ shaft configurations and through-hole options are available, including API. |
 |
37/57 SERIES 4-PORT Combines any two displacements from the 37 and/or 57 series choices in a 4-port or tandem configuration. Allows for 2- or 3-speed operation using extenal valving. Available in both A and D designs. Many of the same optional choices listed above are available. |
CROSS TANDEM 4-PORTS 37, 57, and 125 Series can have a rear motor from a smaller series, including the 15 series. This allows for many displacement combinations or speed ratios when used in 2- or 3-speed circuits. |